The MW8100 Series Power Supply are the best choice for upscale lighting projects of up to 10 amps or 100+ watts. With it’s low ripple "Clean Sweep" technology and Flyback Technologies these power supplies can push more power and more current for greater distances without power loss while keeping the DC output clean unlike similar power supplies. These are the same as our MW8100A series except WITHOUT the PWM (Pulse Width Modulation).
The design intent of the MW8100 Series is to extend the life and quality of high brightness leds while offering plug and play, fuse protected and easy install.
The MW8100A Series is available in three different sizes of 3A, 6A and 10A constant duty. PWM brightness control with "Current Guard" output current monitor are standard on all units. The MW8100A Series are industrial and architectural grade DC regulated power supplies.
The MW8100A Series are designed to reach greater distances at lower current / wattage values. The following chart displays the maximum distance vs. load that can be utilized by this supply.
Model MW8140 3 Amp
LOAD vs. DISTANCE - WIRE
1000mA 150 Ft. 18awg
1500mA 120 Ft. 16awg
2000mA 100 Ft. 16awg
2500mA 70 Ft. 14awg
2850mA 40 Ft. 14awg
Model MW8141 6 Amp
LOAD vs. DISTANCE - WIRE
1000mA 200 Ft. 16awg
2000mA 150 Ft. 16awg
3000mA 100 Ft. 14awg
4000mA 80 Ft. 14awg
5000mA 40 Ft. 14awg
Model MW8142 10 Amp
LOAD vs. DISTANCE - WIRE
3000mA 250 Ft. 12awg
5000mA 170 Ft. 14awg
6500mA 110 Ft. 14awg
7500mA 80 Ft. 12awg
8500mA 40 Ft. 12awg
Physical Characteristics:Overall size: 2.75"H X 3.87"W X 6.25"L
Enclosure: ABS UL 94VO, metal F/R panels
Lighted On/Off Switch
Output Current meter
Fused rear panel
Dimmer Control
Color coded output binding posts
Vented black case
Six foot power cord
Electrical Characteristics:
Input Voltage: 110-127VAC 60 Hz.
Output Voltage: Reg. 12.3 VDC
Constant Current Compensation
Short Circuit Protection
Thermal shut down protection
Fused protection
RoHS Compliant parts
The design intent of the MW8100 Series is to extend the life and quality of high brightness leds while offering plug and play, fuse protected and easy install.
The MW8100A Series is available in three different sizes of 3A, 6A and 10A constant duty. PWM brightness control with "Current Guard" output current monitor are standard on all units. The MW8100A Series are industrial and architectural grade DC regulated power supplies.
The MW8100A Series are designed to reach greater distances at lower current / wattage values. The following chart displays the maximum distance vs. load that can be utilized by this supply.
Model MW8140 3 Amp
LOAD vs. DISTANCE - WIRE
1000mA 150 Ft. 18awg
1500mA 120 Ft. 16awg
2000mA 100 Ft. 16awg
2500mA 70 Ft. 14awg
2850mA 40 Ft. 14awg
Model MW8141 6 Amp
LOAD vs. DISTANCE - WIRE
1000mA 200 Ft. 16awg
2000mA 150 Ft. 16awg
3000mA 100 Ft. 14awg
4000mA 80 Ft. 14awg
5000mA 40 Ft. 14awg
Model MW8142 10 Amp
LOAD vs. DISTANCE - WIRE
3000mA 250 Ft. 12awg
5000mA 170 Ft. 14awg
6500mA 110 Ft. 14awg
7500mA 80 Ft. 12awg
8500mA 40 Ft. 12awg
Physical Characteristics:
Electrical Characteristics:
SKU: MW8140 Weight: 10.00 lbs Price: $ 84.95
